Knowing how to clean a pedestal sump pump is a must if you want to use it for a long time. A pedestal sump pump in your basement or crawl space is crucial to maintaining a dry and water-damage-free home.
However, as with any household device, the sump pump necessitates regular upkeep to ensure proper operation, including ensuring it stays clean.
Over time, sediment and debris can accumulate in and around the sump pit and Pump, leading to blockages that make it less effective or even cause it to malfunction entirely.
Read more about the process of replacing the Pedestal Sump Pump here. Continue Reading…
Regular maintenance is vital to keep your pedestal sump pump running like a well-oiled machine – including the crucial step of cleaning the Pump.
As with any other mechanical device, neglecting this aspect of upkeep can compromise its performance and effectiveness.
In this blog post, we will present you a step-by-step guide on how to clean stuff out of your pedestal sump pumps like some domestic wizard (or at least ensure someone else does), so you can keep your basement or crawl space protected from leaks without having to call cleaning a pedestal sump pump services every other month.
Let’s look at the steps to clean a pedestal sump pump.
Contents
How to Clean a Pedestal Sump Pump:
There are many ideas of cleaning a pedestal sump pump, but we will show you the cheaper and more reliable method. Let’s begin.
Turn off the Power:
So you’re about to tackle the dirty job of cleaning your pedestal sump pump. But before you get started, make sure you disconnect the Pump from its power source. Otherwise, things could go wrong in a big way!
We all know that cleaning can be dangerous – one false move and you could get electrocuted. That’s why taking precautions like this is important, which will help protect you from potential shocks.
Also Read: Complete Working Procedure of Pedestal Sump Pump.
Remove the Pump:
Now that the power supply has been disconnected, you can safely remove the pedestal sump pump from its Pit. Before starting this process, ensure a clean and dry location to place the Pump.
To begin, unplug the power cord from the electrical socket or disable the corresponding circuit breaker. Next, carefully detach the discharge pipe from the Pump, careful not to spill any water. Finally, lift pumps out of Pit and onto a new surface; if the Pump is heavy, you may need help from another person.
Also, check out the top recommended pedestal sump pumps here with a complete buying guide. Continue Reading…
Clean the Sump Pit:
Once you’ve removed the Pump, use a wet/dry vacuum or scoop to remove any debris or sediment in the sump pit. Removing any potential clog-causing junk is crucial, so your Pump can keep chugging along.
If there’s a lot of dirt and grime in the Pit, you may need to hose it down to clean things up. Also, using harsh chemicals on your Pump is a terrible idea! Not only will they cause potential harm to the equipment, but they can also be dangerous for you and anyone else who comes into contact with them.
Cleaning a pedestal sump pump with vinegar or other chemicals can be hazardous; therefore, avoid it at all costs.
Clean the Pump Components:
After removing the Pump from the Pit, you can start cleaning it using a soft-bristled brush or a damp cloth to scrub the components. What to use to clean pedestal sump pump is a common question; the answer is to use recommended washers.
Begin by removing dirt or debris from the impeller, which is responsible for spinning and propelling water out of the sump pit. Be cautious about not committing damage to it while you’re doing this.
Next, clean up float – This turns the Pump on & off according to how much water is in the Pit. Check and confirm that it moves freely. Finally, wipe down the housing where the motor is located and remove any dirt, water, or debris built up there.
Reassemble the Pump:
After you’ve cleansed and dried the Pump and all its parts, it’s time to reassemble it and return it to its original spot in the sump pit. Be careful to make sure all components are installed correctly and that the power cord is securely connected.
Once everything is back in place, turn on your enhanced wit pumps control panel—ensuring not to damage any cables or components during this process—to complete the operation!
Test the Pump:
The final step is to turn the power back on to the sump pump and test it by adding a bucket of water to the Pit. The Pump should start working automatically, pumping the water out of the Pit.
If it doesn’t activate, check that the power supply works and the float switch operate correctly. Once you’ve confirmed everything is in working order, replace the cover on the sump pit and turn back on its power supply!
You can also read a complete Pedestal Sump Pump Switch Replacement Process guide here.
How do I quiet a Pedestal Sump Pump?
To keep your pump basin looking its best, we recommend using a cover made of either a lid or fitted foam insulation. It’s worth noting that newer models of pumps are fully enclosed and come with a plastic cover, which does an excellent job of reducing noise levels.
In contrast, for older models whose basins are exposed, the most viable solution would be to install a piece of plywood that is custom-fitted to snugly over the bay.
Conclusion:
We hope you know how to clean a pedestal sump pump. It is crucial to keep your pedestal sump pump clean and well-maintained for the safety and functionality of your home’s drainage system.
By following our guides’ steps and taking care of your system, you can avoid costly repairs and keep your home protected from potential flooding. If you have questions or concerns about submersible sump pumps or another similar topic, please revisit our website for more information soon. Thanks for learning about how a pedestal sump pump works!
